| Part Number | Item | Description |
|---|---|---|
| 208000A01F060 |  | 8 Pin Female Straight Cord, 6', 16 AWG Cable interface for connecting to Fan Starter or other devices ( One unit supplied with IND-WRU-003 ) Can be ordered in other lengths ( Please call for lengths and pricing) |
| 2R8006A20A120 |  | 8 Pin Male Straight Receptacle, 12" Leads, 16 AWG |
| IND-RAD-IO |  | OEM Radio Unit with I/O interface card Unit comes in : VHF: 136 - 174 MHz UHF: 450 - 470 MHz |
| RG-BN-XXX |  | Magnetic Antenna XXX= 1520 ( 150-162 MHz ) XXX= 1620 ( 162-174 MHz ) XXX- WB ( WideBand 136-174 MHz ) |
| WRU-KEY |  | Key for all WRU Enclosures |
| CSMNB25MM-2.5 |  | 25 Pin Male – Male Data Cable Found in WRU Version 1 & 2 |
| 5742-2 |  | 25 Pin Connector Breakout Box Found in WRU Version 1 & 2 |
| S8VS03012 |  | Omron 12 VDC Power Supply Found in all Versions of WRU |
| IND-INTERFACE.V3 |  | Interface board found in all IND-WRU-003 units This unit ships with all input and output relays |
| 2966197 |  | Phoenix Contact 120 VAC Relay |
| 2966906 | | Phoenix Contact 12 VDC Relay |
| RT314615 |  | Plug In Relay 120 VAC, 16A, SPDT |
| RTH14012 | | Plug In Relay 12 VDC, 16A, SPDT |
| 9101503500 |  | Circuit Breaker 2A, Din Rail Mount |
| 04191162 |  | Ribbon D Sub Data Cable Found in all IND-WRU-003 units |
| 30-9510-99 |  | DB9 Female / Male Data Cable 10' To Connect IND-WRU-M master unit to IND-SERVER-R8 |
| AFM60US12 |  | Power Supply for IND-WRU-M master unit. Typically used when there is no master DC supply in the system Input: 100-240 VAC - 1.5 A - 50-60 Hz Output: 12.0 VDC - 5A |
| HKN-4137A |  | DC Power Cable for IND-WRU-M Master Unit |
| 415-0054-024 |  | Coaxial Jumper Cable, RG58, 24" Found in all WRU Remote Units |
| 150-100-55 |  | Warning Light for local indication on IND-WRU units equipped with gas detection. This would give a local indication of high level alarm Please call for installed pricing |
| IND-TEST-WRU |  | Test set for earlier version remote units. Newer WRU-003 have local indicators in the units |
| UP-99-00 |  | Conspec Infrared Hand Held Programmer |
| SENS-CUP |  | Calibration Adapter Cup |
| P1830-2 |  | Replacement Sensor ( CO ) One Piece Housing For all other Gases ( Please Call ) |
| CX035203 |  | Replacement Sensor ( CO ) For all other gases ( Please Call ) |
| P1879-CO |  | Cal Gas Kit ( CO ) Contains CO Gas Cylinder, Clean Air Cylinder, Adapter Hose, Regulator, Case For all other Gases ( Please Call ) |
| IND-KEY-ACC |  | The IND-KEY-ACC small circuit board programmed with a unique ID and activated by use of a secure key. This accessory can be used on any PC using our TADA software to give the user the ability to lock out some templates from being activated by un-authorized personnel. Example: ( Stench panels equipped with Wireless Remote Units can be viewed by many to monitor status but can only be activated by the PC with Key Access ) |
| ATTENUATOR-XX |  | In-Line Attenuator for various applications. Available in several DB levels. |
Opening Hours
Mon to Fri - 8.00 AM to 4.00 PM
Call Us
Tel: (705) 524-6348